OEM ODM Carbon Fiber Construction Materials Impregnated Resin Increased Safety

Crack Repair Prestressed Carbon Fiber Strip With High Strength

Crack Repair Carbon Fiber Reinforced Polymer Prestressed Carbon Fiber Strip With High Strength

Carbon Fiber Reinforced Polymer (CFRP) Plates/Strip/Laminates

Shear capacity of concrete beams can be increased by externally applying CFRP strengthening systems. provides unique CFRP plates for effective anchorage of stirrup forces in concrete compressive zones.

Post-tensioned systems are effective for control of structural cracks and deflections and to increase fatigue resistance and seismic resistance. provides a unique system based on post-tensioned CFRP plates.

Advantages

Approved by GB50367-2013/GB50728-2011/GB50550-2010

High Strength

Light Weight

Non-corrosive

Alkali Resistant

Typical Data

Tensile Strength

Mean Value 4.49ⅹ105psi(3100MPa)

Design Value 406ⅹ105psi(2800MPa)

Modulus of Elasticity

Mean Value 23.9ⅹ106psi(165,000MPa)

Design Value 23.2ⅹ106psi(160,000MPa)

Elongation at Break 1.7%

Temperature Resistance ＞300°F(＞150℃)

Thickness 1.2mm

Fiber Content ＞68%

Density 0.058 lbs./in3 (1.6g/cm3)

Shelf Life: Unlimited (no exposure to direct sunlight)

Color:  Black

How to Use CFRP Laminate

• Setting out according to design

• Polish the surface of concrete surface

• Prepare ingredients

• Applying adhesive

• Installation the carbon fiber strip

• Maintenance

Key Characteristics of CFRP Strip

• High strength, high modulus

• Light weight

• Easy to install

• Easy to check after construction

• Environmental friendly

• Outstanding fatigue resistance, alkali resistance, acid resistance

.

Packing

Available carton package at 10sqm/carton.

Type 50mm width, 2rolls per carton;

Type 100mm width, 1roll per carton.

Transportation and storage

This product should be stored in dry, cool and well-ventilated enviroment without rain, exposure or impact with sharp objects;

Carbon fiber materials transport and storage shall not be squeezed to avoid carbon fiber damage, or direct sunlight and rain

Epoxy Mixing:

XQ-JGN31P epoxy is recommended for priming of substrate surface. Epoxy adhesives must be mixed according to the manufacturer’s specifications to achieve a homogeneous mixture.

FAQ:

1. Can you do OEM service?
Yes,we can provide full solution for your OEM requirements..

2. Can I take a sample for quality check?
Yes,free sample can be take for a test.

3. What’s your delivery time?
20days for OEM service base on MOQ

4. Where have your products been sold to?
Our CFRP carbon fiber have been exported all over the world.

5. Are you a manufacturer?
Yes ,we are a professional manufacturer specializing in manufacturing CFRP sheet since 2005.