Home ProductsChemical Anchor Adhesive

Anti Drawing Epoxy Chemical Anchor Adhesive 1000ml Without Sagging

Anti Drawing Epoxy Chemical Anchor Adhesive 1000ml Without Sagging

Anti Drawing Epoxy Chemical Anchor Adhesive 1000ml Without Sagging
Anti Drawing Epoxy Chemical Anchor Adhesive 1000ml Without Sagging

Large Image :  Anti Drawing Epoxy Chemical Anchor Adhesive 1000ml Without Sagging

Product Details:
Place of Origin: China
Brand Name: XINCHOR
Model Number: FixingChor 110
Payment & Shipping Terms:
Minimum Order Quantity: 100pcs
Price: Negotiable
Packaging Details: individual in plastic cartridges, 20pcs/ctn,
Delivery Time: 30 days
Payment Terms: L/C, T/T
Supply Ability: 100,000pcs per month
Detailed Product Description
Tensile Strength: 55KN Mix Ratio: 1:1
Resin Type: Modified Pure Epoxy Application: Structural Strengthening
T-peeling Strengt: Less Than 25mm Tensile Shear Strength: Above 10Mpa
Capacity: 1000ml Rebar Size: Dia. 10-32
High Light:

Anti Drawing Chemical Anchor Adhesive

,

1000ml Chemical Anchor Adhesive

,

Rebar Epoxy Adhesive Without Sagging

Anti Drawing Chemical Anchor Adhesive 1000ml No Expansibility Without Sagging

1000ml 1:1 Cartrige Epoxy Chemcial Anchor Adhesive For Structural Strengthening
Chemical anchor adhesive, epoxy injection mortar, Chemical fixing glue,
Chemical anchoring system used for anchoring and rebar connections in concrete.
 
Item #: FixingChor110
Capacity: 1000ml
Materials: Epoxy
Mixing Ratio: 3:1
 

Application Range

For structural work:

Rebar / steel reinforcement anchoring in new and refurbishment works.

Threaded rods

Bolts and special fastening systems

Mechanical and electrical services installation

Anchoring of supports for ducting and equipment.

Metal Work, carpentry

Fixing of handrails, balustrades and supports

Fixing of railings

Fixing of window and door frames

Fixing of the following substrates:

Concrete

Hard natural and reconstituted stone

Solid rock and masonry

Steel

Wood

 

Suitable for

Non-cracked concrete

Reinforcement bars

For fixing of:

Steel constructions

 

 

 

 

Testing Items

 Condition

 Index

Adhesive Performance (According to China National Standard GB50728-2011)

Splitting Tensile Strength (MPa)

Under (23±2)℃,(50±5)%RH, tested by loading speed of 2mm/min

≥8.5

Flexural Strength (MPa)

≥50

 (no fragment damage)

Compressive Strength (MPa)

≥60

Bonding Capacity (According to China National Standard GB50728-2011)

Steel-Steel Tensile Shear Strength (MPa)

(23±2),(50±5)%RH

≥10

Bonding strength of Ribbed steel bar (or screw) with concrete under constrain drawing condition

(23±2)(50±5)%RH

C30,Ф25,L=150mm

≥11

C60,Ф25,L=150mm

≥17

Steel-Steel T-peeling strength (mm)

(23±2)℃,(50±5)%RH

≤25

Non-volatile content

(105±2)℃,(180±5)min

≥99%

Ageing resistance to heat and humidity  90d

Reduction rate of tensile strength

Under normal room temperature

≤12%

(According to China National Standard JGJ145-2013)

Tensile Strength  (after high temperature welding)

Dia12 Grade II steel, C30 concrete

Hole dia.16mm, Depth: 150mm

55.1N, 57.0N, 54.8N

 

 

Approved for anchorings in

 

Railway or express way modification works

Structure reinforcement

Curtain wall installing

Concrete, cracked and non-cracked Applications

Rebar planting in concrete structures.

Bridge modification works

Keel fixing in out wall

 

ATTENTION

 

 

- Do not install anchors when the temperature is less than 10°C.

- If the cartridge is not finished, please clean the opening, then put the plug back and cap tightly.

- At temperatures below 10°C should be warmed or stored in temperatures

of 10-30°C for 24hours prior to use to improve product flow and cure.

- If the gelling time expires, please use a new static mixer.

- Do not cut or shorten nozzles.

- It can be used again in the future by replacing the static mixer.

- Please ensure hole is properly cleaned. Hole may be damp but must be free from water.

- Do not install anchors when substrate temperature is less than 0°C.

 

Anti Drawing Epoxy Chemical Anchor Adhesive 1000ml Without Sagging 0

Contact Details
ZHEJIANG XINCHOR TECHNOLOGY CO., LTD.

Contact Person: Colin Mao

Tel: 86-13336183725

Send your inquiry directly to us (0 / 3000)