Home ProductsChemical Anchor Adhesive

Reliable Thread Rods Chemical Adhesive Anchors High Grip Force Styrene Free

Reliable Thread Rods Chemical Adhesive Anchors High Grip Force Styrene Free

Reliable Thread Rods Chemical Adhesive Anchors High Grip Force Styrene Free
Reliable Thread Rods Chemical Adhesive Anchors High Grip Force Styrene Free

Large Image :  Reliable Thread Rods Chemical Adhesive Anchors High Grip Force Styrene Free

Product Details:
Place of Origin: China
Brand Name: XINCHOR
Model Number: FixingChor 142
Payment & Shipping Terms:
Minimum Order Quantity: 100pcs
Price: Negotiable
Packaging Details: individual in plastic cartridges, 20pcs/ctn,
Delivery Time: 30 days
Payment Terms: L/C, T/T
Supply Ability: 100,000pcs per month
Detailed Product Description
Mix Ratio: 2:1 Tensile Strength: 55KN
Resin Type: Modified Pure Epoxy Application: Thread Rod
T-peeling Strengt: Less Than 25mm Tensile Shear Strength: Above 10Mpa
Capacity: 585ml Rebar Size: Dia. 10-32
High Light:

Thread Rods Chemical Adhesive Anchors

,

Styrene Free Chemical Adhesive Anchors

,

High Grip Force Injectable Adhesive Anchors

Thread Rods Chemical Adhesive Anchors High Grip Force Styrene Free Reliable

Approved for anchorings in

Concrete, cracked and non-cracked Applications

Rebar planting in concrete structures.

Railway or express way modification works

Structure reinforcement

Curtain wall installing

Bridge modification works

Keel fixing in out wall

 

ATTENTION

- Do not install anchors when the temperature is less than 10°C.

- If the cartridge is not finished, please clean the opening, then put the plug back and cap tightly.

- At temperatures below 10°C should be warmed or stored in temperatures

of 10-30°C for 24hours prior to use to improve product flow and cure.

- If the gelling time expires, please use a new static mixer.

- Do not cut or shorten nozzles.

- It can be used again in the future by replacing the static mixer.

- Please ensure hole is properly cleaned. Hole may be damp but must be free from water.

- Do not install anchors when substrate temperature is less than 0°C.

420ml 2:1 Two Component Chemcial Anchor Adhesive For Thread Rods
Chemical anchor adhesive, epoxy injection mortar, Chemical fixing glue,
Chemical anchoring system used for anchoring and rebar connections in concrete.
 
Item #: FixingChor142
Capacity: 420ml
Materials: Epoxy
Mixing Ratio: 2:1
 
 

Characteristics

 

Suitable for medium loads and non-critical applications.

 

Fast working times for early loading in time sensitive applications.

 

Use in extremely cold environments and fixings holes.

 

Good durability formulation, resistance to chemicals.

 

Used for studs and relatively small diameter rebar. ⋅

 

Fixings in concrete, wood, or other high strength materials.

 

 

 

Testing project

 Condition

 Index

Gel Performance (According to China National Standard GB50728-2011)

Splitting Tensile Strength (MPa)

Under (23±2)℃,(50±5)%RH, tested by loading speed of 2mm/min

≥8.5

Flexural Strength (MPa)

≥50

 (no fragment damage)

Compressive Strength (MPa)

≥60

Bonding Capacity (According to China National Standard GB50728-2011)

Steel-Steel Tensile Shear Strength (MPa)

(23±2),(50±5)%RH

≥10

Bonding strength of Ribbed steel bar (or screw) with concrete under constrain drawing condition

(23±2)(50±5)%RH

C30,Ф25,L=150mm

≥11

C60,Ф25,L=150mm

≥17

Steel-Steel T-peeling strength (mm)

(23±2)℃,(50±5)%RH

≤25

Non-volatile content

(105±2)℃,(180±5)min

≥99%

Ageing resistance to heat and humidity  90d

Reduction rate of tensile strength

Under normal room temperature

≤12%

(According to China National Standard JGJ145-2013)

Tensile Strength  (after high temperature welding)

Dia12 Grade II steel, C30 concrete

Hole dia.16mm, Depth: 150mm

55.1N, 57.0N, 54.8N

 

 

.

 

Reliable Thread Rods Chemical Adhesive Anchors High Grip Force Styrene Free 0

 

Contact Details
ZHEJIANG XINCHOR TECHNOLOGY CO., LTD.

Contact Person: Colin Mao

Tel: 86-13336183725

Send your inquiry directly to us (0 / 3000)