|
Product Details:
Payment & Shipping Terms:
|
| Tensile Strength: | Above 25Mpa | Pulling Modulus Of Elasticity: | ≥1500 MPa |
|---|---|---|---|
| Mixing Ratio: | 2:1 | Bending Strength: | ≥30 MPa |
| Color: | Grey | Viscosity: | 120-500 Pa.s |
| High Light: | concrete gap sealer,concrete leak sealer |
||
High Strength Epoxy Crack Repair Sealer For Concrete Restoration
Concrete Crack Repairing Grout Epoxy
Crack Repair Grouting adhesive
XQ-GF Crack Grouting Adhesive
Mainly used for concrete crack grouting,repairing,reinforcement of beam, floor, pole and basement of building, bridge and roadway. It is two components injection adhesive, mainly with modified epoxy resin and can be hardened at room temperature.
Range of Application
Repairing and reinforcement of the concrete crack on outer and inner walls, roof, beam, pole and floor.
Repairing the hollow parts of the wall and ground of cement and mortar, ceramics and stones Crack repairing for the concrete buildings, such as prefabricated components, equipment, silos, reservoirs, dams, bridges, tunnels, pipes, concrete pavement.
Features
Product performance
Basic parameters
1) Appearance
Part A (main): transparent liquid
Part B (hardener): brown transparent liquid
2) Mixing viscosity: 120-500 Pa.s
3) Hardened density: 1.10 +/- 0.10g/cm3
4) Mixing ratio (weight): 2:1
5) Handling time (25℃): ≥30min
6) Hardening time: 3 hours
6) Shelf time: 24 months
Product Performance
1 Main Performance
| Testing | Testing condition | Index |
| Gel Performance | ||
| Tensile strength |
Tested under (23±2)℃,(50±5)% RH upon 7 days maintenance after processing |
≥25 MPa |
| Pulling modulus of elasticity | ≥1.5×103 MPa | |
| Elongation | ≥1.7% | |
| Bending strength | ≥30 MPa no broken damage | |
| Compressive Strength | ≥50 MPa | |
| Bonding Ability | ||
| Steel-steel tensile shearing strength | Maintenance for 7 days after processing, tested under (23±2)℃, (50±5)% RH condition | ≥15 MPa |
| Steel-steel docking tensile strength | ≥20 MPa | |
| Non volatile content (solid) | ≥99 % | |
Processing Flow
Crack confirmation and marking → Crack treatment → Seal the crack and fix the injection gun base
→ mix the adhesive according to the ratio → low pressure injection → hardening and maintenance
The interval setting according to the crack width as blow:
|
Crack width (mm) |
Interval (mm) | ||
| Min. | Standard | Max. | |
| 0.05-0.2 | 150 | 200 | 250 |
| 0.2-3.0 | 250 | 300 | 350 |
Packaging and Logistics
1. Two components packed separately, the mixing ratio is 2:1
2. Shall be stored in cool (under 25℃), dry and ventilated place, no exceed 1 year.
3. This product is non dangerous goods, can be shipped as normal chemical materials.
Attention
Shall be stored in cool, dry and ventilated place, avoid sun exposure and high temperature
Do not mix too much at each time, use upon actual necessary
If touched by skin, clean with acetone and washed by water immediately
Contact Person: Colin Mao
Tel: 86-13336183725
