Home ProductsConcrete Crack Sealer

Fix Voids Concrete Crack Sealer Gravity Feed Filling XQ-GF21 Smooth Depth

Fix Voids Concrete Crack Sealer Gravity Feed Filling XQ-GF21 Smooth Depth

Fix Voids Concrete Crack Sealer Gravity Feed Filling XQ-GF21 Smooth Depth
Fix Voids Concrete Crack Sealer Gravity Feed Filling XQ-GF21 Smooth Depth Fix Voids Concrete Crack Sealer Gravity Feed Filling XQ-GF21 Smooth Depth

Large Image :  Fix Voids Concrete Crack Sealer Gravity Feed Filling XQ-GF21 Smooth Depth

Product Details:
Place of Origin: China
Brand Name: XINCHOR
Model Number: XQ-GF21
Payment & Shipping Terms:
Minimum Order Quantity: 100 kgs
Price: Negotiable
Packaging Details: 100 meters per roll in carton
Delivery Time: 30 days
Detailed Product Description
Pulling Modulus Of Elasticity: ≥1500 MPa Bending Strength: ≥30 MPa
Mixing Ratio: 2:1 Tensile Strength: Above 25Mpa
Color: Grey Viscosity: 120-500 Pa.s
High Light:

polyurethane concrete crack sealant

,

concrete leak sealer

Good Penetration Epoxy Concrete Crack Sealer For Structural Strengthening

Concrete Crack Repairing Grout Epoxy

Crack Repair Grouting adhesive

 

Good Penetration Epoxy Concrete Crack Sealer For Structural Strengthening

 

Mainly used for concrete crack grouting,reinforcement of beam, floor, repairing,pole and basement of building, bridge and roadway. It is two components injection adhesive, mainly with modified epoxy resin and can be hardened at room temperature.

 

Range of Application

 

Repairing the hollow parts of the wall and ground of cement and mortar, ceramics and stones Crack repairing for the concrete buildings, such as prefabricated components, equipment, silos, reservoirs, dams, bridges, tunnels, pipes, concrete pavement.

Repairing and reinforcement of the concrete crack on outer and inner walls, roof, beam, pole and floor.

 

Features

  • Effectively seal the crack and improve the durability of concrete;
  • After curing has excellent toughness and impact resistance;
  • Easy to handle, short maintenance period with reliable quality.
  • Waterproof, corrosion resistance, ageing resistance;
  • Low viscosity, fluidity, can be applied to cracks smaller than 0.05mm;

Product performance

 

Appearance

Part A (main): transparent liquid

Part B (hardener): brown transparent liquid

 

Handling time (25℃): ≥30min

 

Hardening time: 3 hours

 

Shelf time: 24 months

 

Mixing viscosity: 120-500 Pa.s

Hardened density: 1.10 +/- 0.10g/cm3

 

Mixing ratio (weight): 2:1

 

Product Performance

1 Main Performance

Testing Testing condition Index
Gel Performance
Tensile strength

Tested under (23±2)℃,(50±5)% RH

upon 7 days maintenance after processing

≥25 MPa
Pulling modulus of elasticity ≥1.5×103 MPa
Elongation ≥1.7%
Bending strength ≥30 MPa no broken damage
Compressive Strength ≥50 MPa
Bonding Ability
Steel-steel tensile shearing strength Maintenance for 7 days after processing, tested under (23±2)℃, (50±5)% RH condition ≥15 MPa
Steel-steel docking tensile strength ≥20 MPa
Non volatile content (solid)   ≥99 %
 

Processing Flow

Crack confirmation and marking

Crack treatment

Seal the crack and fix the injection gun base

Mix the adhesive according to the ratio

Low pressure injection

Hardening and maintenance

 

The interval setting according to the crack width as blow:

 

Crack width (mm)

Interval (mm)
Min. Standard Max.
0.05-0.2 150 200 250
0.2-3.0 250 300 350
 

 

 

Packaging and Logistics

1. Two components packed separately, the mixing ratio is 2:1

2. Shall be stored in cool (under 25℃), dry and ventilated place, no exceed 1 year.

3. This product is not a dangerous goods, can be shipped as normal chemical materials.

 

Attention

Shall be stored in cool, dry and ventilated place, avoid sun exposure and high temperature

Do not mix too much at each time, use upon actual necessary

If touched by skin, clean with acetone and washed by water immediately

 

Established in 2005, Xinchor Focuses on research, development, production and marketing for building reinforcement materials and chemical anchoring adhesive. Our Headquarter and marketing center located in West Lake Technological Park in Hangzhou, only 2 hours driving from Shanghai Pudong Airport, as well as we have sales branches throughout China, we passed ISO9001-2008 certificate in 2010. As the earliest reinforcement material providers, we have our products wide range applied to high-speed railway, nuclear power station, bridge, tunnel, subway, municipal and civil buildings, and maintain a long-term cooperative relationship with a number of well-known construction companies. As a professional manufacturer of reinforcement materials, with company spirit of "quality first, integrity management" purposes, we can provide good quality products for building and industry at home and abroad. You are welcome to contact us, we would be delighted to be of service, providing advice and professional building reinforcement solutions.

 

 

Fix Voids Concrete Crack Sealer Gravity Feed Filling XQ-GF21 Smooth Depth 0

Contact Details
ZHEJIANG XINCHOR TECHNOLOGY CO., LTD.

Contact Person: Colin Mao

Tel: 86-13336183725

Send your inquiry directly to us (0 / 3000)