Home ProductsAdhesive Anchoring System

JGJ145-2013 Epoxy Resin Adhesive Anchoring System Ageing Resistance

JGJ145-2013 Epoxy Resin Adhesive Anchoring System Ageing Resistance

JGJ145-2013 Epoxy Resin Adhesive Anchoring System Ageing Resistance
JGJ145-2013 Epoxy Resin Adhesive Anchoring System Ageing Resistance

Large Image :  JGJ145-2013 Epoxy Resin Adhesive Anchoring System Ageing Resistance

Product Details:
Place of Origin: China
Brand Name: XINCHOR
Model Number: FixingChor 136
Payment & Shipping Terms:
Minimum Order Quantity: 100pcs
Price: Negotiable
Packaging Details: individual in plastic cartridges, 20pcs/ctn,
Delivery Time: 30 days
Payment Terms: L/C, T/T
Supply Ability: 100,000pcs per month
Detailed Product Description
Application: Adhesive Anchor Materials: Epoxy Resin
Mixing Ratio: 5:1 Package: 20 Cartridges Per Carton
Splitting Tensile Strength: 8.5Mpa Compressive Strength: 60Mpa
High Light:

8.5Mpa Adhesive Anchoring System

,

JGJ145-2013 Adhesive Anchoring System

,

Ageing Resistance Adhesive Anchoring System

Epoxy Resin With Strong Odor Structure And High Molecular Stability

Main Performance

Testing project Condition Index
Gel Performance (According to China National Standard GB50728-2011)
Splitting Tensile Strength (MPa) Under (23±2)℃, (50±5)%RH, tested by loading speed of 2mm/min ≥8.5
Flexural Strength (MPa)

≥50

(no fragment damage)

Compressive Strength (MPa) ≥60
Bonding Capacity (According to China National Standard GB50728-2011)
Steel-Steel Tensile Shear Strength (MPa) (23±2) (50±5)%RH ≥10
Bonding strength of Ribbed steel bar (or screw) with concrete under constrain drawing condition (23±2)℃ (50±5)%RH C30,Ф25,L=150mm ≥11
C60,Ф25,L=150mm ≥17
Steel-Steel T-peeling strength (mm) (23±2)℃,(50±5)%RH ≤25
Non-volatile content (105±2)℃,(180±5)min ≥99%
Ageing resistance to heat and humidity 90d
Reduction rate of tensile strength Under normal room temperature ≤12%
(According to China National Standard JGJ145-2013)
Tensile Strength (after high temperature welding)

Dia12 Grade II steel, C30 concrete

Hole dia.16mm, Depth: 150mm

55.1N, 57.0N, 54.8N
 

 

 

 

Advantages

 

  • High bonding strength, good flexible performance similar as embedded.
  • acid-resistant, good shock resistance, stress-free fixed;
  • good thixotropy, particularly applicable to the sides or top surface anchoring;
  • two-cylinder direct-mix package, with a dedicated glue gun without manual mixing
  • Ageing resistance, good heat tolerance and does not creep at ambient temperature;

  • Low sensitivity in moist condition with long term load stability;

Application Range

For structural work:

Rebar / steel reinforcement anchoring in new and refurbishment works.

Threaded rods

Bolts and special fastening systems

Mechanical and electrical services installation

Anchoring of supports for ducting and equipment.

Metal Work, carpentry

Fixing of handrails, balustrades and supports

Fixing of railings

Fixing of window and door frames

Fixing of the following substrates:

Concrete

Hard natural and reconstituted stone

Solid rock and masonry

Steel

Wood

 

Suitable for

Non-cracked concrete

Reinforcement bars

For fixing of:

Steel constructions

 

 

Processing Method

1 Tools

  • Electric hammer
  • Hole cleaning brush
  • Air compressor
  • Glue gun

2 Attention

  • Drill as per requested hole dia. and depth
  • Clean the hole completely
  • Inject from the bottom of the hole and pull out the gun slowly.
  • After planting the bar, let the gel harden in still.

 

  • Processing Flow

     Drilling: As per technical data

     Cleaning: using pump or compressed air and brush to clean the hole completely.

    Assembling and Injection: Mount the static mixer onto the bottle, push out some incomplete mixed gel at the front part,then inject from the          bottom of the hole, to fill 1/2 to 2/3 depth of the hole.

    Bar planting: spin slowly the bar or screw into the hole, adjust up and down for several times to make the gel average, but don’t touch it during hardening time.

    Curing and Maintenance: According to the temperature of the base materials, give enough time to harden and start to load mounting until it        hardened completely.

 

Curing time:

 

Operation and Harden time
Temperarure -5 0 10 20 ≥30
Operation time (min) 60 45 30 25 20
Harden time (h) 72 48 24 12 6

 

 

Consumption Chart (holes per cartridge)

 

Anchor Rod dia. M10 M12 M16 M20 M24
Drilling Dia.(mm) 12 14 18 24 28
Depth (mm) 90 110 145 180 220
Each usage 8ml 13ml 28ml 62ml 103ml
360ml 45 27      
390ml 48 30 14 6 3
585ml 73 45 20 9 5
650ml 81 50 23 10 6
 

 

 

Packaging:

  • One cartridge with one mixer in carton
  • 12pcs/20pcs/30pcs per carton.
  • Xinchor label or your own label.
  • EXP Date on the top of cartridge.
  • Customized Packing.
Item No. Mixing Standard Pack/Set Pcs/Ctn Ctn Size (cm) Ctn/Pallet Pallets/ 20'FCL Pallets/ 40'FCL
FixingChor 136 5:1 360ml+ 1mixer 20 27x27x27 60 10 20
FixingChor 139 3:1 390ml+ 1mixer 20 40x26x27 50 10 20
FixingChor 158 3:1 585ml + 1mixer 12 29x21.5x30 64 10 20
FixingChor 140 1:1 400ml+ 1mixer 30 49×30×26 40 10 20
FixingChor 165 1:1 650ml+ 1mixer 10 31.5×21×26 70 10 20
FixingChor 142 2:1 420ml + 1mixer 20 46x22x23 40 10 20

 

Shipping:

  • Shipments can be arranged by sea, air, courier express.
  • Courier express includes DHL, FedEx, TNT, UPS, EMS, SF, etc.

JGJ145-2013 Epoxy Resin Adhesive Anchoring System Ageing Resistance 0

Contact Details
ZHEJIANG XINCHOR TECHNOLOGY CO., LTD.

Contact Person: Colin Mao

Tel: 86-13336183725

Send your inquiry directly to us (0 / 3000)