Home ProductsAdhesive Anchoring System

Low Odour Epoxy Anchoring System Strong Stability Molecular Structure

Low Odour Epoxy Anchoring System Strong Stability Molecular Structure

Low Odour Epoxy Anchoring System Strong Stability Molecular Structure
Low Odour Epoxy Anchoring System Strong Stability Molecular Structure

Large Image :  Low Odour Epoxy Anchoring System Strong Stability Molecular Structure

Product Details:
Place of Origin: China
Brand Name: XINCHOR
Model Number: FixingChor 136
Payment & Shipping Terms:
Minimum Order Quantity: 100pcs
Price: Negotiable
Packaging Details: individual in plastic cartridges, 20pcs/ctn,
Delivery Time: 30 days
Payment Terms: L/C, T/T
Supply Ability: 100,000pcs per month
Detailed Product Description
Application: Adhesive Anchor Materials: Epoxy Resin
Mixing Ratio: 5:1 Package: 20 Cartridges Per Carton
Splitting Tensile Strength: 8.5Mpa Compressive Strength: 60Mpa
High Light:

60Mpa Epoxy Anchoring System


Stability Molecular Epoxy Anchoring System


Low Odour Adhesive Anchoring System

High Strength Anchoring Epoxy Low Odour Strong Stability Molecular Structure

360ml 5:1 Two Component Adhesive Anchoring System For Structural Strengthening

Chemical anchor adhesive, epoxy injection mortar, Chemical fixing glue,

Chemical anchoring system used for anchoring and rebar connections in concrete.


Item #: FixingChor136

Capacity: 360ml

Materials: Epoxy

Mixing Ratio: 5:1





  • All concrete building without embedded steel bar
  • Reinforcement and reconstruction of buildings with concrete
  • Reinforcement and reconstruction of Railway, Road, Bridge, Water resources, Tunnel, etc.
  • Reinforcement for equipment, pipeline installation, supports of curtain wall.



Technical Parameter:



Main Performance

Testing project Condition Index
Gel Performance  (According to China National Standard GB50728-2011)
Splitting Tensile Strength (MPa) Under (23±2)℃, (50±5)%RH, tested by loading speed of 2mm/min ≥8.5
Flexural Strength (MPa)


(no fragment damage)

Compressive Strength (MPa) ≥60
Bonding Capacity (According to China National Standard GB50728-2011)
Steel-Steel Tensile Shear Strength (MPa) (23±2)℃  (50±5)%RH ≥10
Bonding strength of Ribbed steel bar (or screw) with concrete under constrain drawing condition (23±2)℃ (50±5)%RH C30,Ф25,L=150mm ≥11
C60,Ф25,L=150mm ≥17
Steel-Steel T-peeling strength (mm) (23±2)℃,(50±5)%RH ≤25
Non-volatile content (105±2)℃,(180±5)min ≥99%
Ageing resistance to heat and humidity 90d
Reduction rate of tensile strength Under normal room temperature ≤12%
 (According to China National Standard JGJ145-2013)
Tensile Strength (after high temperature welding)

Dia12 Grade II steel, C30 concrete

Hole dia.16mm, Depth: 150mm

55.1N, 57.0N, 54.8N




Processing Method

1 Tools

  • Electric hammer
  • Hole cleaning brush
  • Air compressor
  • Glue gun

2 Attention

  • Drill as per requested hole dia. and depth
  • Clean the hole completely
  • Inject from the bottom of the hole and pull out the gun slowly.
  • After planting the bar, let the gel harden in still.


  • Processing Flow

     Drilling: As per technical data

     Cleaning: using pump or compressed air and brush to clean the hole completely.

    Assembling and Injection: Mount the static mixer onto the bottle, push out some incomplete mixed gel at the front part,then inject from the          bottom of the hole, to fill 1/2 to 2/3 depth of the hole.

    Bar planting: spin slowly the bar or screw into the hole, adjust up and down for several times to make the gel average, but don’t touch it during hardening time.

    Curing and Maintenance: According to the temperature of the base materials, give enough time to harden and start to load mounting until it        hardened completely.


Curing time:


Operation and Harden time
Temperarure -5 0 10 20 ≥30
Operation time (min) 60 45 30 25 20
Harden time (h) 72 48 24 12 6



Consumption Chart (holes per cartridge)


Anchor Rod dia. M10 M12 M16 M20 M24
Drilling Dia.(mm) 12 14 18 24 28
Depth (mm) 90 110 145 180 220
Each usage 8ml 13ml 28ml 62ml 103ml
360ml 45 27      
390ml 48 30 14 6 3
585ml 73 45 20 9 5
650ml 81 50 23 10 6




  • One cartridge with one mixer in carton
  • 12pcs/20pcs/30pcs per carton.
  • Xinchor label or your own label.
  • EXP Date on the top of cartridge.
  • Customized Packing.
Item No. Mixing Standard Pack/Set Pcs/Ctn Ctn Size (cm) Ctn/Pallet Pallets/ 20'FCL Pallets/ 40'FCL
FixingChor 136 5:1 360ml+ 1mixer 20 27x27x27 60 10 20
FixingChor 139 3:1 390ml+ 1mixer 20 40x26x27 50 10 20
FixingChor 158 3:1 585ml + 1mixer 12 29x21.5x30 64 10 20
FixingChor 140 1:1 400ml+ 1mixer 30 49×30×26 40 10 20
FixingChor 165 1:1 650ml+ 1mixer 10 31.5×21×26 70 10 20
FixingChor 142 2:1 420ml + 1mixer 20 46x22x23 40 10 20



  • Shipments can be arranged by sea, air, courier express.
  • Courier express includes DHL, FedEx, TNT, UPS, EMS, SF, etc.

Low Odour Epoxy Anchoring System Strong Stability Molecular Structure 0

Contact Details

Contact Person: Colin Mao

Tel: 86-13336183725

Send your inquiry directly to us (0 / 3000)